Jump to content

Measuring wind gradient

Recommended Posts

This is my first post on this forum and I am not sure which section to best post it into. But I have a question and I hope someone may be able to help with ideas.
Some researchers, at the university I work at, want to measure wind speed at elevations from near ground then at intervals of 5 feet up to about 35 feet.
I understand they want a mast that would have several cup anemometers so measurements can be taken simultaneously at different heights and relate it to the behaviour of certain insects.
The mast would need to be transportable and not fixed in one place as they will be using it in more than one location.
Constructing this is going to be tricky! A 35 to 40 foot mast that, wouldn't break, could be kept upright when in use and could be dismantled and transported for use at other sites!
Aluminium poles would probably bend and break, something like fishing rods fixed together would be too flexible, balloons would not be accurate for height or a drone or two each with anemometers attached?
If anyone has any ideas I would be pleased to hear.
I have suggested calculating wind gradient but I don't think they want to do that – I think it is because of surface friction being different at the sites where they will be measuring.

Share this post

Link to post
Share on other sites

Just moving this into the weather stations forum :) 

Share this post

Link to post
Share on other sites

with that height and having it portable, I would think sectional pole with guy ropes is the only option.

how temporary is the installation going to be?

Share this post

Link to post
Share on other sites

From what I know they want to sample wind at 40 foot as that is the standard height met office record at, then at 5 foot intervals down from that. The vegetation type at ground level (hard surfaces, short grass, long grass, bushy vegetation and low trees) would probably cause different types friction resulting in a change in wind speed at the heights between ground and 40 foot. This, in turn, would influence the behaviours and foraging of some flying insects.

I am guessing they would be sampling for short periods of time at various sites for about 15 to 30 min. Then returning to the same sites on different days.

I have found some telescopic carbon fibre poles and will test things out before the spring. 

Next is fixing the faulty datalogger on a weather station.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.