Help please with Davis Vantage Vue setup

[egret]

I have bought a second hand Vantage Vue and as a start just want to get the station to talk to the console.

It appears that a signal is received on channel 3 but nothing shows on the display. I have it set to receive station 1 but had assumed that the setting should be station 1 channel 3 ( not station 3 as channel 3 if that makes sense)

any ideas what I may have done wrong / need to do to get the display to show data? 

[egret]

Don't worry I have cracked it - turning off station one and turning on station 3 ( to match the channel 3 designation) did the trick.